Profilers, Stabilisers and the Asphalt Zipper

Profilers and stabilisers are arguably the one piece of ground working equipment that takes the most punishment. These machines are designed to virtually tear up the road and that is exactly what our high-quality attachments do. Our durable range is suitable for a range of skid steer applications and is manufactured to the very highest specifications.

AC Profiler/Stabiliser

Hydrapower AC Road Profiler and Stabiliser

This state-of-the-art AC Profiler/Stabiliser is built with a John Deere/Cummins engine with 203hp. It has a working depth of up to 250mm and can run at 14/metres/minute at full depth, depending on road condition.

The drum housing is fully enclosed so that milled debris is contained at all depths. The AC Profiler/Stabiliser has easy access to picks for cleaning, is available in widths from 450mm to 1000mm and has optional stabiliser drum and water tank attachments.

AC Profiler/Stabiliser
Host Machine SizeHigh-Flow Skid Steer
(Wheeled or Tracked)
Primary TaskRepairing Road Failures
and/or Road Stabilising
Cutting Sizes Available
(Width x Depth) and
Hydraulic Power
Requirements for
Hotmix Milling
450x150mm, 30–40kw
450x200mm, 34–75kw
600x200mm, 48–75kw
750x250mm, 55–75kw
1000x250mm, 63–75kw
Side ShiftHydraulic, Centre to Left
Depth ControlHydraulic – infinitely variable
Drive MechanismHydraulic motor via a planetary
reduction gearbox fitted with
a duo-cone seal
Number of
Cutting Picks
450x150mm — 48 Picks
450x200mm — 56 Picks
600x200mm — 70 Picks
750x250mm — 96 Picks
1000x250mm — 120 Picks
Hydraulic Flow
Required
450x150mm — 90–130lpm
450x200mm+ — 100–170lpm
Hydraulic Pressure
Required
450x150mm — 170–220bar
450x200mm+ — 206–345bar
TiltHydraulic
Tilt Angle
(left or right)
450mm — 15º
600mm+ — 10º
Water Tank
Option Available?
Yes
CommentsFor single system loaders
extra valving is required
on attachment which will incur
an additional charge.

92TS Tractor Stabiliser

hydrapower 92TS tractor stabiliser
  • Suits minimum 84kw (115hp) tractor with creeper gear
  • Capable of travelling between jobs at 40km/h
  • Built in, closed loop hydraulic circuit, including oil cooler and comprehensive filtration, with pumps driven off tractor PTO
  • Hydraulically operated height adjustment
  • 120L Hydraulic oil tank
  • Hydraulically operated rear covers to ensure cutting area covered at all cutting depths
92TS Tractor Stabiliser
Host Machine Size115hp–140hp Tractor
(Requires ground speed
of 140m/hr or less).
Primary TaskRepairing Road Failures
and Road Stabilizing
Cutting Sizes Available
(Width x Depth) and
Hydraulic Power
Requirements
1800x300mm,
2000x300mm,
(as per tractor’s power)
Side ShiftN/A
Depth ControlHydraulic —
infinitely variable
Drive Mechanism2x Hydraulic motors
via a planetary reduction
gearboxes fitted with
a duo-cone seal
Number of
Cutting Picks
1800x300mm — 160 Picks
2000x300mm — 176 Picks
Hydraulic Flow
Required
Determined by Tractor’s Power
Hydraulic Pressure
Required
Determined by Tractor’s Power
TiltN/A
Tilt AngleN/A
Water Tank
Option Available?
Yes
CommentsTractor must have a minimum
of three separate remotes

Asphalt Zipper

Hydrapower 1m Stabiliser

GET IN TOUCH today to discuss your requirements
GET IN TOUCH